Petroleum refineries face significant challenges when managing hydrocarbon-impacted soil and sludge. High contaminant concentrations, variable waste characteristics, and regulatory cleanup requirements can make remediation difficult to plan and execute. The treatment method a facility chooses affects project timelines, costs, and the path to regulatory closure.
Iron Creek Group uses advanced thermal desorption technology to treat contaminated soil and sludge on-site. Our Enhanced Thermal Conduction (ETC) and TecZero™ systems apply controlled heat to remove hydrocarbons from different types of material, offering a more predictable alternative to condition-dependent bioremediation.
Why Does Bioremediation Sometimes Fall Short at Refinery Sites?
Bioremediation uses microorganisms to break down petroleum hydrocarbons in contaminated soil. Under suitable conditions, it can reduce contaminant concentrations, but its effectiveness depends on factors such as temperature, moisture, soil composition, and the types and concentrations of hydrocarbons present.
These conditions can be difficult to maintain at refinery sites. Soil with high hydrocarbon concentrations, accumulated contamination, or a complex mixture of compounds may require extended treatment or multiple cycles to meet cleanup requirements.
Another concern is incomplete degradation. In some cases, microorganisms may only partially break down petroleum hydrocarbons, leaving behind intermediate compounds that can still pose environmental risks. A reduction in the original contaminants doesn’t necessarily indicate that the soil has met cleanup requirements.
For refinery operators, these limitations make treatment timelines difficult to predict, particularly when site conditions change during a project. Iron Creek Group has repeatedly been called in to remediate sites where previous bioremediation attempts failed to meet requirements. These setbacks can leave project teams facing extended timelines, additional costs, and the need to start over with a different treatment method.
How Does Thermal Desorption Treat Hydrocarbon-Impacted Soil?
Thermal desorption uses controlled heat to volatilize contaminants from soil or other materials. Iron Creek Group’s ETC and TecZero™ systems apply heat indirectly, without direct flame contact with the material being treated.
While conventional thermal desorption systems often use rotating drums or other mechanical components to process contaminated material, Iron Creek Group’s technologies use static treatment cells that provide highly controlled, indirect heating.
Contaminated material is excavated and processed in a controlled treatment system at the project site. As the material heats, hydrocarbons vaporize and are captured. Depending on the application, the resulting vapors can be directed to a thermal oxidizer for destruction, sent to a condenser for recovery, or redirected into the system as supplemental fuel.
Recovering hydrocarbons for reuse can reduce fuel consumption. Unlike bioremediation, thermal treatment does not depend on microbial activity or favorable biological conditions, allowing for more predictable treatment schedules and results that can be tested against applicable regulatory cleanup standards.
What Is the Difference Between Iron Creek Group’s ETC and TecZero™ Systems?
Iron Creek Group’s two thermal technologies address different types of petroleum-impacted material. ETC is designed for larger areas of drier soil, while TecZero™ handles high-moisture materials such as refinery sludge.
Enhanced Thermal Conduction for Drier Soil
Iron Creek Group’s Enhanced Thermal Conduction (ETC) system treats larger volumes of drier petroleum-impacted soil, including material from landfarming areas, impacted fill, and sites with accumulated hydrocarbon contamination.
ETC uses a static design with no moving parts within the treatment system. The soil is placed within a sealed treatment cell. Heat moves through the material by conduction, vaporizing the hydrocarbons so the system can capture them for destruction or recovery.
Unlike bioremediation, which can slow significantly in cold weather, Iron Creek Group’s thermal technology operates across a wide range of climatic conditions. This allows remediation work to continue year-round, even at remote sites. Treatment cells can be transported by plane, boat, or truck, providing flexibility when site access is limited.
TecZero™ for Soils and Refinery Sludge
Tank bottom sludge and saturated hydrocarbon materials can require a different treatment approach because of their high moisture content.
Iron Creek Group’s TecZero™ system is designed for these wetter materials. It processes them in a self-contained, modular bin structure using indirect heat in a low-oxygen environment. The system does not require prescreening or dewatering before treatment.
As the material heats, hydrocarbons vaporize and are captured for destruction or recovery. For refinery sites containing both drier contaminated soil and high-moisture sludge, Iron Creek Group can assess the waste streams and determine the appropriate treatment configuration.
How Does On-Site Thermal Treatment Benefit Refineries?
On-site thermal treatment can reduce the transportation, disposal, and backfill requirements associated with conventional excavation and off-site disposal. It also provides a controlled treatment process for material that may be difficult to remediate through biological methods alone.
Reduced Transportation Costs and Liability
Excavating contaminated soil and sending it to a landfill involves more than the disposal fee. Projects may also require trucking, labor, transportation permits and documentation, as well as the purchase and delivery of clean backfill.
Treating contaminated material at the project site reduces these requirements, along with the transportation risks and carbon emissions associated with hauling contaminated soil away and bringing replacement material back.
Depending on the project, waste classification, and applicable regulatory requirements, treated material that meets the necessary criteria may also qualify for delisting from hazardous waste classification.
More Predictable Field Operations
Iron Creek Group’s thermal systems typically require only three to five personnel to oversee operations. Their static design eliminates moving parts within the treatment system that would otherwise require mechanical maintenance.
The equipment can be mobilized and brought into operation within a few days, depending on site conditions and project requirements. Combined with the ability to control treatment conditions and evaluate results against applicable cleanup standards, this helps refinery operators plan more confidently around project schedules and regulatory closure.
How Has Iron Creek Group Used Thermal Treatment in Challenging Environments?
Since 2015, Iron Creek Group has deployed its remediation technology in environments ranging from the Arctic Circle to Antarctica. Its work at the Marwell Tar Pits in Whitehorse, Yukon, demonstrates how thermal treatment can address long-standing petroleum contamination in a challenging climate.
At the former World War II-era refinery site, Iron Creek Group worked with Milestone Environmental Contracting to treat approximately 36,000 tons of soil containing heavy hydrocarbon contamination, including free petroleum product reaching the surface. Using ETC technology, the team treated the material through all seasons, including extreme winter conditions.
Post-treatment testing confirmed that the soil met the applicable Yukon contaminated site standards. The project was completed in 11 months, and on-site treatment kept approximately 1,000 truckloads of contaminated soil off public roads and out of landfills.
Choosing the Right Refinery Waste Treatment Method
Bioremediation may be appropriate where conditions support microbial activity and project timelines allow for biological treatment. However, when high hydrocarbon concentrations, variable site conditions, or unsuccessful previous treatment make cleanup more challenging, thermal remediation offers a more controlled approach.
For refinery operators, the total project cost depends on more than the treatment method itself. Timelines, transportation needs, and regulatory requirements also play a role.
Iron Creek Group’s ETC and TecZero™ technologies provide flexible, on-site solutions for managing complex refinery waste. To discuss a remediation project, visit Iron Creek Group.
Frequently Asked Questions about Thermal Treatment vs. Bioremediation
When is thermal desorption a better choice than bioremediation for refinery waste?
Iron Creek Group’s thermal desorption technology can be a better fit when hydrocarbon concentrations are high, waste characteristics make biological treatment difficult, or project timelines require a more controlled treatment process. The appropriate method depends on the material, site conditions, and applicable cleanup requirements.
Can bioremediation and thermal treatment be used at the same refinery site?
Yes. Different areas of a refinery site may contain different types or concentrations of contamination. A site assessment can help determine whether bioremediation, thermal treatment, or a combination of methods is appropriate.
Does thermal desorption work in cold climates?
Yes. Thermal desorption uses controlled heat rather than relying on biological activity, which can slow in cold conditions. Iron Creek Group’s ETC technology was used at the Marwell Tar Pits project in Whitehorse, Yukon, where treatment continued through all seasons.
Does thermally treated soil need to be tested?
Yes. Treated material must be evaluated against applicable regulatory requirements. Testing and documentation help establish whether cleanup objectives have been met and whether the material qualifies for applicable reuse or delisting pathways.
About Iron Creek Group
Iron Creek Group develops advanced mobile remediation technology for complex environmental challenges across North America and beyond. Its ETC and TecZero™ systems treat contaminated soil and sludge on-site, helping clients address petroleum contamination and other remediation needs. To learn more, visit ironcreekgroup.com.